Evolution Gun Works EGW 1911 – HD Ball Head Long Disconnector Blue 10050

EGW machined the top of their disconnector taller so that it does not drag on the sear pin. This is important when you are doing trigger work under 2 1/4 lbs since you can feel the slightest drag. Next, they added the ball head to get rid of the click usually found on 1911 guns caused by the head moving back and forth in the frame hole. Usually gunsmiths stake the frame hole trying to minimize play in an attempt to remove the trigger click – the ball head is a better solution to this problem. They also altered the geometry of the disconnector so that it is not tripped when inserting a loaded magazine. This could cause an accidental discharge when reloading with a live round in the chamber. This alteration allows for an additional safety upgrade in your 1911. The bottom spade incorporates a small .006 corner radius so that the disconnector does not dig into the trigger bow and it improves functionality. They machine the HD Disconnector in one of their 6 made in USA Fadal Machining centers. They then go off to Vacu-Braze in Perkasie, PA for vacuum heat treat, which is less stressful than conventional heat treating. EHW disconnectors are then sent to Universal Black Oxide to be coated.